Lightolier HX Series User Manual

Hx series, Hazardous location combination led exit sign

Advertising
background image

HX Series

Hazardous Location Combination LED Exit Sign

Page 1 of 2

Job Information

Type:

Job Name:

Cat. No.:

Notes:

Features

Illumination: Illumination

of the exit stencil face is

accomplished with long lasting,

high output LEDs, producing

an average illumination level

in excess of 25 fl (85.7 cd/m

2

)

at the end of the 90 minute

emergency run time. A variety

of optional lamp heads provide

design flexibility for egress

lighting.

Housing: Constructed of

impact-resistant, fiberglass-

reinforced polyester. Housing

color is gray with corrosion-

resistant hardware and clear

polycarbonate cover. The HX

Series is UL listed for Class I,

Division 2, Groups A, B, C &

D; Class I, Zone 2, Groups IIA,

IIB (+ H

2

) & IIC; and Class II,

Division 2, Groups F & G. The

housing includes a one-piece

formed gasket and corrosion-

resistant hardware. Standard

internal or external mounting

feet provides installation

flexibility.

Operating Temperature

Range: Standard location

65°F (19°C) to 85°F (30°C)

Diagnostic Electronics

(standard): 120/277 VAC

dual voltage input with surge

protection is standard on all

models. Charging system is

microprocessor driven with

software embedded diagnostic

routine and temperature

compensation. 120/277 VAC

input, surge protection,

brownout, AC lockout and low

voltage disconnect features are

standard.

Self-Testing Diagnostics

(optional): The diagnostic/

charging platform with self-

testing mode automatically

runs a one-minute self-test

every 30 days and a 30-minute

test on the sixth and twelfth

month. A one-minute or

90-minute test may be initiated

via the push to test switch on

the unit or by activating the

appropriate test command on

the optional IR test device.

Electrical Specifications:

6 V 18 W Red or Green:

120 VAC, 0.133 A, PF 0.80

277 VAC, 0.058 A, PF 0.80

6 V 36 W Red or Green:

120 VAC, 0.122 A, PF 0.70

277 VAC, 0.053 A, PF 0.70

6 V 72 W Red or Green:

120 VAC, 0.129 A, PF 0.80

277 VAC, 00.56 A, PF 0.80

Code Compliance

UL 924 and 844 listed. NFPA

101, NEC, BOCA, OSHA and

IBC illumination standards.

Temperature Rating (T-Rating)

160° (T3C). Class I, Zone 2

T-Rating 200° (T3). IEC

61951-1 Life Testing (batteries).

Warranty

Five year full electronics

warranty. One year full plus

four year prorated battery

warranty.

13.2"

(33.5 cm)

11.2"

(28.4 cm)

HX636R2HT18SD2

6.6"

(16.8 cm)

17.5"

(44.5 cm)

Advertising