Liebert AC4 - Manual (Page 42)

System and Control Options
36
7.7.2 Set Date & Time/Automatic Daylight Saving Time
The AC4 has a built-in real-time clock that is backed up by an encapsulated lithium battery and set
up to adjust automatically for daylight saving time twice a year. The Setup System Info menu allows
you to set the current date or time or change the automatic adjustment at any time.
To change the daylight saving time setting or to set the current date
or time:
• From the Setup System Info Menu, use the arrows ↑↓ to choose
Set Date & Time, then press Enter ↵ .
• To change the daylight saving time setting:
• To the right of Daylight Svg Time, use the arrows ↑↓ to
choose Y (Yes - automatically adjust for daylight saving time)
or N (No), then press Enter ↵ .
• The format of the date and time is DD-MMM-YY HR:MM:SS. To
set the current date or time:
• Press Enter ↵ to advance to the next character position you
want to change.
• Use the arrows ↑↓ to choose from available entries:
• Press Enter ↵ to advance to the next character position.
• When finished, press Enter ↵ again.
7.7.3 Setup Site ID
You may enter a Site ID to identify the AC4’s location, using a name
that may consist of up to 40 characters (see Table 12 for valid charac-
ters). The Site ID will appear with each alarm.
To enter or change the Site ID:
• From the Setup System Info Menu, use the arrows ↑↓ to choose
Setup Site ID, then press Enter ↵ .
• To enter a Site ID:
• Use the arrows ↑↓ to choose a character.
• Press Enter ↵ to advance to the next character position.
• If the Site ID is less than 40 characters, you may enter an
underscore (_) character to indicate the end of the name.
• When finished, press Enter ↵ again.
Date Day (DD) 0-31
Month (MMM) JAN-DEC
Year (YY)
00-99
Time Hour (HR) 00-23
Minutes (MM) 00-59
Seconds (SS) 00-59
Setup System Info Menu
SETUP SYSTEM INFO
CHANGE PASSWORD
> SET DATE & TIME
↑↓
=NEXT
↵
=SELECT
SETUP SITE ID
FACTORY DEFAULTS
Set Date & Time
SET DATE & TIME
DAYLIGHT SVG TIME: Y
18-MAY-04 10:56:30
↑↓
=SELECT
↵
=NEXT/END
Setup System Info Menu
SETUP SYSTEM INFO
CHANGE PASSWORD
SET DATE & TIME
↑↓
=NEXT
↵
=SELECT
> SETUP SITE ID
FACTORY DEFAULTS
Setup Site ID
SETUP SITE ID
↑↓
=SELECT
↵
=NEXT/END