Perle Systems Adaptors User Manual
Page 32
FAST Serial Adaptors User Guide
Installing under Windows 2000/XP/Server 2003/Vista/Server 2008
Page 32
Chapter 2 Installing drivers and host cards
3. Using the instructions given in the next table, use the Add/Remove Hardware Wizard to
assign the host card addresses and IRQ levels you require.
In this Wizard page
Do the following...
4. In the Add/Remove Hardware Wizard, select
Add/Troubleshoot a device
and press the
Next >
button.
The Choose a Hardware Device page is now
displayed.
5. In the Choose a Hardware Device page,
scroll up the list of devices and click on
Add a new device
, then click on the
Next >
button.
The
Find New Hardware page
is now
displayed.
6. In the Find New Hardware page, select
No, I
want to select the hardware from a list
and click on the
Next >
button.
The Hardware Type page is now displayed.
7. In the
Hardware Type
page, select
Mutli-
port serial adaptors
and click on the
Next >
button.