Perle Systems Adaptors - Manual (Page 62)

FAST Serial Adaptors User Guide
Installing under SCO OpenServer 6
Page 62
Chapter 2 Installing drivers and host cards
The list of currently selected ports is now updated to show the new getty definition.
Selecting terminal
type 4. In the Terminal type list, double click on the terminal type you want for the currently
selected ports. Alternatively, single click on the item you want in the Terminal type list and
press the
Set button.
The list of ports is now updated to show the new terminal type.
Setting up a port
login 5. In the Port Configuration window, click on one of the menu options shown in the next
table to display the ports with the login status you want to change. For example, ports
without logins enabled.
These options allow you to filter on the type of ports you are looking for. This facility is
helpful when you have a large number of ports installed.
6. If required, in the Port Configuration window, select the ports whose logins status you
want to change, then click on one of the following to change the login status;
New definition
displayed here
New terminal type
displayed here
To Display Click menu option
All ports with logins enabled Ports > Logins
All ports without logins enabled Ports > Unconfigured
Display all ports Ports > All
Tc Click on
Enable logins for a port Enable button
Disable logins for a port Disable button