Perle Systems Adaptors - Manual (Page 85)

FAST Serial Adaptors User Guide
Installing host cards and distribution accessories
Page 85
Chapter 2 Installing drivers and host cards
6. Insert the AT card you want to install into a vacant host card slot and secure in place as
shown in the next picture.
7. Repeat steps 1. to 6. until you have installed all the AT cards you want.
8. Replace and secure the system cover.
9. Plug in the mains and turn on the power.
Installation of AT host cards is now complete. For further details about installing host cards
including other types, see
Before you start on page 17 .
Caution
Full anti-static precautions should be taken when handling host
cards.