Perle Systems Adaptors User Manual
Page 98
Advertising
FAST Serial Adaptors User Guide
Installing host cards and distribution accessories
Page 98
Chapter 2 Installing drivers and host cards
Operating mode
1. On the host card, set the jumper
JP6
to the
FAST
setting.
IRQ level
2. Using jumper
JP7
on the host card, set the IRQ level you want from the values listed on
the card;
JP7
sets IRQ level,
move jumper to IRQ
level required.
For example to
select a value of 12,
move jumper to
IRQ12
position.
Advertising