Perle Systems Adaptors - Manual (Page 63)

FAST Serial Adaptors User Guide
Installing under SCO OpenServer 6
Page 63
Chapter 2 Installing drivers and host cards
The selected ports in the list now are updated show their new login status. For example if
you enable the login for a port, a tick is displayed along side the port as shown in the next
picture.
7. Repeat steps 2. to 6. until you have configured all the ports you want.
Exiting the Port
Configuration tool 8. In the Port Configuration menu, click on Ports > Save & Exit .
The Port Configuration tool now closes and saves any changes you have made.
Note
To quit the Port Configuration tool without saving changes,
• In the Port Configuration menu, click on Ports > Quit .