Perle Systems Adaptors - Manual (Page 33)

FAST Serial Adaptors User Guide
Installing under Windows 2000/XP/Server 2003/Vista/Server 2008
Page 33
Chapter 2 Installing drivers and host cards
The Select a Device Driver page is now
displayed.
8. If your host card type isn’t shown, in the
Select a Device Driver page click on the
Have Disk button.
A message window is now displayed which
prompts you for the driver and location you
want to use.
9. In the message window, enter or select the
driver you want and click on the OK button to
accept settings and close the window.
The Select a Device Driver page is now
updated to show the new driver you have
selected.
10.In the Select a Device Driver page, select
the manufacturer and model you require,
then click on the
Next > button.
The Start Hardware Installation page is now
displayed.
11. In the Start Hardware Installation page, click
on the Next > button to accept your choice.
A completion message page is now
displayed as shown in the next picture
Note
If resources are not free you will have to change the resource
configuration using the procedures described on
page 35 .
In this Wizard page Do the following...