Connecting the multichannel analog outputs, Connecting the digital output – Pioneer ELITE DV-49AV User Manual

Page 14

Advertising
background image

02

14

En

Connecting the multichannel
analog outputs

If your AV receiver has 5.1 channel analog
inputs, we recommend connecting this player
to it using the multichannel analog outputs.
Doing this will ensure that you can enjoy all
kinds of disc, including Dolby Digital and DTS
DVD-Video discs, as well as high sampling rate
and multichannel DVD-Audio and SACD
discs.

Connect the multi-channel audio

outputs on this player to the multi-channel
audio inputs on your AV receiver.
It’s convenient to use three stereo audio
cables; one for the

FRONT, one for the

SURROUND and one for the CENTER and
SUBWOOFER channels.

You can also use the S-Video or component
video jacks to connect to the AV receiver if you
prefer.

Tip

• After connecting up and switching on, you

should change the

Audio Output Mode

setting in the Initial Setup menu from the
default

2 Channel to 5.1 Channel. See

also Audio Output Mode on page 46.

Connecting the digital output

This player has both optical and coaxial-type
digital audio outputs for connection to an AV
receiver. Connect whichever is convenient.

Depending on the capabilities of your AV
receiver, you might have to set up this player to
output only digital audio in a compatible
format. See Digital Audio Out settings on
page 40 and refer to the operating instructions
that came with your AV receiver.

Note that SACD audio is not output through
these jacks, so this connection should be in
addition to, rather than instead of, a 5.1
channel analog connection.

Connect one of the DIGITAL AUDIO

OUT jacks on this player to a digital input
on your AV receiver.

For an optical connection, use an optical cable
(not supplied) to connect the

OPTICAL

DIGITAL AUDIO OUT jack to an optical input
on your AV receiver.

For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to connect
the

COAXIAL DIGITAL AUDIO OUT jack to a

coaxial input on your AV receiver.

P

R

P

B

Y

COMPONENT VIDEO OUT

VIDEO OUT

S-VIDEO OUT

AUDIO OUT (5.1ch)

SL

SR

HDMI OUT

SW

C

L

R

AV receiver

To multi-channel
audio inputs

DIGITAL AUDIO OUT

OPTICAL COAXIAL

AV receiver

To coaxial/optical
digital input

DV49AV_KU_EN.book 14 ページ 2008年6月23日 月曜日 午前11時51分

Advertising