Pioneer ELITE DV-49AV - Manual (Page 39)

08
39
En
Chapter 8
Initial Settings menu
Using the Initial Settings
menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select ‘Initial
Settings’.
2 Use the cursor buttons and ENTER to
select the setting and option you want to
set.
All the settings and options are explained on
the following pages.
Note
• In the table below, the default setting is
shown in bold ; other settings are shown in
italics.
• The Digital Audio Out settings only need
to be set if you have connected the digital
output of this player to an AV receiver, or
other equipment.
• Check the operating instructions supplied
with your other equipment to see which
digital audio formats it’s compatible with.
• Some settings, such as TV Screen , Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
• The HDMI Out , HDMI Resolution and
HDMI Color settings only need to be set if
you connected this player to an
HDMI-compatible component using the
HDMI connector.
• The Digital Audio Out , Component Out ,
and Speakers settings cannot be set if the
player is connected to an HDMI-
compatible component using the HDMI
connector. Additionally, certain settings
such as
HDMI Out , HDMI Resolution , and
HDMI Color may be changed
automatically.
Initial Settings
DV49AV_KU_EN.book 39 ページ ２００８年６月２３日 月曜日 午前１１時５１分