Pioneer ELITE DV-49AV - Manual (Page 40)

08
40
En
Digital Audio Out settings
Setting Option What it means
HDMI Out LPCM (2CH) Set if your monitor or device only accepts stereo
input. On this setting multichannel audio is
downmixed to 2 channels for stereo linear PCM
output.
LPCM (5.1CH) Set if the monitor or device you have connected
using HDMI is compatible with Linear PCM multi-
channel formats. All audio signals are output as
linear PCM 5.1 format. (Use this setting if you want
to decode all streams by a player.)
Auto Dolby Digital, DTS and MPEG sources are
processed according to how they were encoded,
and linear PCM sources are heard as is.
Auto (DSD) Set if you want to output DSD audio from an SACD
source.
Off No digital audio output. Choose this option when
you want to change the
Digital Audio Out and
Speakers settings.
Digital Out On Digital audio is output from the digital outputs.
Off No digital audio output.
Dolby Digital Out Dolby Digital Dolby Digital encoded digital audio is output when
playing a Dolby Digital DVD disc.
Dolby Digital > PCM Dolby Digital audio is converted to PCM audio
before being output.
DTS Out DTS DTS encoded digital audio is output when playing a
DTS disc. (Noise will be output if your amplifier/
receiver is not compatible with DTS audio.)
DTS > PCM No digital audio is output when playing a DTS
disc.DTS audio is converted to PCM audio before
being output.
Linear PCM Out Down Sample On 96 kHz digital audio is converted to 48 kHz for
digital output. Note that High sampling rate DVD-
Audio discs (192 kHz or 176.4 kHz) automatically
output down-sampled audio through the digital
outputs.
Down Sample Off 96 kHz digital audio is output as is at 96 kHz.
MPEG Out MPEG MPEG encoded digital audio is output as is.
MPEG > PCM MPEG encoded digital audio is converted to PCM
audio for digital output.
DV49AV_KU_EN.book 40 ページ ２００８年６月２３日 月曜日 午前１１時５１分