Pioneer ELITE DV-49AV - Manual (Page 56)

09
56
En
No picture/No color. • Incorrect video connections: Check that connections are correct
and that plugs are inserted fully. Also check the video cable for
damage.
• TV/monitor or AV amplifier settings are incorrect: Check the
instruction manual of the connected equipment.
• The video output is set to progressive but your TV/monitor is not
compatible with progressive scan: See page 13 for how to set to
Interlace.
Screen is stretched or aspect
does not change. • The TV Screen setting in the Initial Settings menu is incorrect.
See page 53 for how to set it correctly for your TV/monitor.
Picture disturbance during
playback or the picture is
dark. • This player is compatible with Macro-Vision System copy guard.
Some discs include a copy prevention signal, and when this type of
disc is played back, stripes etc., may appear on some sections of
the picture depending on the TV. This is not a malfunction.
• Due to the player’s copy protection circuits, connection of this
device through a VCR or an AV selector may prevent recording or
cause picture problems. This is not a malfunction.
No audio, or audio is
distorted. • No audio is output during slow motion playback or when
scanning discs other than audio CDs.
• Some DVD discs do not output digital audio: Switch your
amplifier to the player’s analog outputs.
• Check that the disc is free from dust and dirt, and that it is not
damaged (page 52).
• Check that all interconnects are firmly inserted.
• Check that the plugs and terminals are free of dirt, oxide, etc. and
clean if necessary. Also check the cable for damage.
• Make sure the player’s output is not connected to the amplifier’s
phono (turntable) inputs.
• Check your amplifier/receiver’s settings (volume, input function,
speaker settings, etc.).
The analog audio is OK, but
there appears to be no
digital audio signal. • Make sure that the Digital Out setting is set to On (page 40).
• Check that the Dolby Digital Out, DTS Out and MPEG Out
settings (page 40) are suitable for your amplifier/receiver — check
the instruction manual that came with your amplifier/receiver.
• SACDs and some DVD-Audio discs do not output digital audio.
Listen through the player’s analog audio outputs.
Noticeable difference in DVD
and CD volume. • This is due to differences in the audio format and is not a
malfunction.
Problem Remedy
DV49AV_KU_EN.book 56 ページ ２００８年６月２３日 月曜日 午前１１時５１分