Pioneer ELITE DV-49AV - Manual (Page 51)

08
51
En
Speaker Installation
• Default settings: L/R: Large | C: Large | SL/
SR: Large | SW: On
You only need to make this setting if you
connected this player to your amplifier using the
5.1 channel analog outputs.
This setting does not affect digital audio output.
Use the Speaker Installation screen to tell the
player what kinds of speakers you have
connected.
1 Use the
/ (cursor up/down) buttons
to select a speaker.
• The L and R , and SR and SL speakers are
paired; you can’t set them differently.
2 Press  (cursor right) to modify the
selected speaker.
3 Use the
/ (cursor up/down) buttons
to change the current setting.
• You can see the effect of your changes in
the room graphic on the right of the
screen.
• Except for the subwoofer, you can set
speaker size to Large or Small . If the main
speaker cone in the speaker is 12 cm or
more, set to
Large , otherwise set to Small
(or Off if you don’t have that speaker).
• If you set the front L and R speakers to
Small , the center and surround speakers
are automatically set to Small and the
subwoofer to On .
• The subwoofer can only be set to On or Off .
4 Press  (cursor left) to go back to the
speaker list if you want to modify another
speaker, or press ENTER to exit the Speaker
Installation screen.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Audio Output Mode  5.1 Channel
Speaker Distance
Speaker Installation
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
L
C
R
SR
SL
SW Large
Large
Large
Large
Large
On
Initial Settings
DV49AV_KU_EN.book 51 ページ ２００８年６月２３日 月曜日 午前１１時５１分