Hdmi output with dvd-audio and sacd sources – Pioneer ELITE DV-49AV User Manual
Page 49
08
49
En
HDMI output with DVD-Audio and SACD sources
The way audio sources are output from the HDMI terminal depends on the specification of the
connected component.
Components specification
Example
component
Disc format
(DVD-Audio or SACD)
SACD
2ch
5.1ch
Auto (DSD)
Component
/output
SACD, DVD-Audio
and 5.1 channel
compatible on
HDMI
1
1.
This unit checks the specification of the connected component (such sample rate/multichannel limitations and
compatibility with protected audio contents) and outputs the signal accordingly. Note that ‘DVD-Audio compatible’
indicates compatibility with protected audio contents. ‘SACD compatible’ indicates compatibility with DSD signals.
SC-09TX
VSX-03TXH
2ch
5.1ch
2
2.
If
HDMI Out setting (page 40) is set to LPCM (2CH), DVD-Audio multichannel sources will be downmixed to
stereo. (In cases where the source is downmix-prohibited, only the front left/right channels are output.) For SACD
sources, the 2 channel (stereo) SACD audio area is selected.
If the video output resolution is 480i, 576i, 480p or 576p, audio output may be limited to 2 channel (depending to the
connected component).
DSD 2ch/
5.1 ch
DVD-Audio and 5.1
channel compatible
on HDMI
1
VSX-94TXH
VSX-92TXH
2ch
5.1ch
2
No sound
DVD-Audio and
2 channel
compatible on
HDMI
1
PDP-6020FD
PDP-5020FD
2ch
Left/Right or
2ch downmix
3
3.
In cases where the source is downmix-prohibited, only the front left/right channels are output.
No sound
Incompatible with
DVD-Audio on
HDMI
1
PDP-5050HD
PDP-4350HD
No sound
4
4.
If
CPPM shows in the front panel display, it means it is not possible to output CPPM copycontrolled DVD-Audio
sources from the HDMI connection. Discs with no CPPM protection are limited to 2 channel output.
No sound
4
No sound
DV49AV_KU_EN.book 49 ページ ２００８年６月２３日 月曜日 午前１１時５１分