2 ip configuration – Planet Technology WGSD-1020 User Manual
Page 19
Advertising
- 15 -
4.3.2.1.2 IP Configuration
Press
”Edit” to modify the IP address, Subnet Mask and Gateway.
Figure 4-12 IP Configuration screen
Press
“Tab” to move the cursor to IP Address, Subnet Mask and Gateway to input new value.
After setup completed, press
“ctrl-A” to save the current configuration. The following screen in
Figure 4-13
appears.
Figure 4-13 IP Configuration save successful screen
You need to reboot the Switch to take effect of your IP configuration.
Advertising