2 port & trunking configuration – Planet Technology WGSD-1020 User Manual
Page 22
Advertising
- 18 -
4.3.2.2 Port & Trunking Configuration
From the Switch Static Configuration sub-screen
(see Figure 4-9)
, highlight Port Trunk Configuration
and press enter. The Port Trunk Configuration screen in
Figure 4-17
appears.
Figure 4-17 Port & Trunking Configuration screen
Press
” Edit” to configure the trunk group. After setup completed, press “ctrl-A” to save the current
configuration. The following screen in
Figure 4-18
and
4-19
appears.
Figure 4-18 Save Port & Trunking Configuration process screen
Advertising