Planet Technology WGSD-1020 - Manual (Page 7)

- 3 -
2. HARDWARE DESCRIPTION
This section describes the hardware features of the Giga Switch. For easier management and control of the
switch, familiarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display
the unit LED indicators. Before connecting any network device to the Switch, read this chapter carefully.
2.1 Front Panel
The unit front panel provides a simple interface monitoring the switching. It includes a power indicator for
each port.
PWR
LNK/ACT
100
LNK/ACT
100
2 4 6 8
1 3 5 7
1000/
100
FDX FDX
1000/
100
10/100/1000Mbps
Intelligent Ethernet Switch
1000 Base - T
9 10
WGSD-1020 1 3 5 7
2 4 6 8
LNK/
ACT LNK/
ACT
Figure 1: WGSD-1020 Switch front panel
LED indicators:
System
100Base-TX
LNK/ACT
100
LED Color Function
PWR Green Lit on: Power on
Lit off: power off
LED Color Function
LNK / ACT Green Lit: indicate the link through that port is successfully
established.
Blink: indicate that the switch is actively sending or
receiving data over that port.
LED Color Function
100 Orange Each RJ45 station port on the Switch is assigned
one LED for monitoring port "Good Link" and data
traffic. The LED is normally OFF. After the power
on operation, LED will light orange color steadily to
show "Good Link" when port is been connected
with 100Mbps. LED will be off when port is run at
10Mbps.