Planet Technology WGSD-1020 - Manual (Page 24)

- 20 -
4.3.2.4 VLAN Configuration
From the Switch Static Configuration sub-screen (see Figure 4-9) , highlight VLAN Configuration
and press enter. The VLAN Configuration screen in Figure 4-21 appears.
Figure 4-21 VLAN Configuration screen
This sub-menu contains four items:
VLAN Configure: please refer to chapter 4.3.2.4.1
Create a VLAN Group: please refer to chapter 4.3.2.4.2
Edit/ Delete a VLAN Group: please refer to chapter 4.3.2.4.3
Previous Menu: return to previous menu
4.3.2.4.1 VLAN Configure
Provide disable /enable VLAN function and 3 VLAN mode selections.
Figure 4-22 VLAN Configuration screen
Press “Ctrl-A” to choose “Edit” for enable VLAN function and select the 3 VLAN modes through
the space bar. The IEEE 802.1Q VLAN screen in Figure 4-23 appears. The maximum PVID is
4094.