Panasonic WJ-RT208 - Manual (Page 32)

32
3. Setup
Setup Menu List
Setting Item
"SYSTEM MANAGEMENT"
"SYSTEM SETUP"
"DISK INFORMATION"
"REBOOT SYSTEM"
"PICTURE ADJUST"
"TIME & DATE"
"VERSION"
"SEARCH"
Description
Basic operation settings of this unit
HDD information and initialization
Restart of this unit
Screen adjustment of each channel
Time and date setting
Version confirmation of the software
Recording data check and playback
Timer recording settings of each channel
"REC & EVENT SETUP"
"TIMER REC"
"TERMINAL REC" Terminal recording settings of each channel
"VMD REC" Motion detector recording settings of each channel
"RECORD LENGTH" Partial length of recording
"AUDIO SELECT" Selection of the presence of audio
"PTZ SETUP"
PTZ selection "PTZ SELECT"
"PRESET INFORMATION" PTZ preset position check
"CAMERA SETUP" Camera connection check and protocol settings
"COMMUNICATION SETUP"
Settings for network IP address, gateway, etc. "NETWORK SETUP"
"RS485 SETUP" Settings for RS485 communication
"DATA PORT SETUP" Settings for serial data communication
"REPORT"
"SYSTEM LOG"
"EVENT LOG"
"OLDEST DATA INFORMATION"
"USER INFORMATION"
"USER LEVEL SETUP"
Operating log of this unit, and trouble log
Log at event occurrence
Time of the oldest recording data on the hard disc
Functional setup to enable the user at each level to operate in each channel
"ONLINE USER INFORMATION" Display of IP address for on-line user
"PASSWORD" User password setup at each level
"KEYLOCK" Keyboard lock
"DATA MANAGEMENT"
"FACTORY DEFAULT"
"BACKUP"
Returning each setup parameter to the default settings
Recorded data backup in the external hard disk