Panasonic WJ-RT208 - Manual (Page 52)

52
Setting item
Setting item
3.3 VMD Setup (VMD REC)
Notes:
• The parameters for this unit can be defined for each channel.
• The underlined parameters will not be copied when the channel copy is performed.
* At the default, no area is selected. Up to 140 (14 x 10) areas are available.
3.4 Recording Length (RECORD LENGTH)
3.5 Audio Selection (AUDIO SELECT)
4. PTZ Setup (PTZ SETUP)
4.1 PTZ Selection (PTZ SELECT)
4.2 Preset Information (PRESET INFORMATION)
"Channel No."
"Sensitivity"
"Area Setup"
"Alarm Output"
"(Alarm Time)"
Default setting
1
10
– *
0
030
Available values
1 - 8
01 - 99
–
0 - 3
000 - 999
"Rec. Interval" 060 030 - 999
"PTZ Preset" 000 000 - 256
"Rec. Quality" "Normal" "SP Fine/Fine/Good/Normal/Extended"
"(Frame Rate)" "Full" "Full/1/2F/1/4F/1/8F/1/16F"
"(Stream Type)" "CBR" "CBR/VBR"
"Period1" 00:00 00:00 - 24:00
24:00 00:00 - 24:00
"Off" "Off/On"
"Period2" 00:00
24:00
"Off"
00:00 - 24:00
00:00 - 24:00
"Off/On"
Setting item
"Record Length"
Default setting
015
Available values
005 - 240
Setting item
"Audio1 - 8"
Default setting
"Audio select"
Available values
"Selected/not selected"
Setting item
"Cam1 - 8"
Default setting
"Not selected"
Available values
"Selected/not selected"
"Camera"
"Preset"
Default setting
1
001
Available values
1 - 8
001 - 256