Panasonic WJ-RT208 - Manual (Page 53)

53
Setting item
Available values
Available values
Available values
"Alarm Port"
"Alarm Enable"
"Line Speed"
5. Camera Setup (CAMERA SETUP)
Note: The parameters for this unit can be defined for each channel.
6. Communication Setup (COMMUNICATION SETUP)
6.1 Network Setup (NETWORK SETUP)
6.2 RS485 Setup (RS485 SETUP)
Setting item
"Channel No."
"CH Enable"
"Mask Area"
"Mask Enable"
"PTZ Protocol"
"Rec. Reserve"
"Channel Name"
Default setting
1
"On"
–
"Off"
"PANASONIC"
000
"CH1"
1 - 8
"Off/On"
–
"Off/On"
"PANASONIC/TYPE 1/TYPE 2/TYPE 3/TYPE 4"
000 - 200
"en: 10 letters, em: 5 letters"
Setting item
"IP Address"
"Subnet Mask"
"Gateway"
"Server Port"
"Protocol"
"Alarm Center IP"
Default setting
192.168.000.088
255.255.255.000
192.168.000.001
2000
"TCP"
192.168.000.188
4000
"Off"
"Auto Mode"
001.000.000.000 - 255.255.255.255
000.000.000.000 - 255.255.255.254
001.000.000.000 - 255.255.255.255
1024 - 9999
"TCP/UDP/MCAST"
001.000.000.000 - 255.255.255.255
1024 - 9999
"Off/On"
"Auto Mode/10M Half/10M Full/100M Half/100M Full"
Setting item
"Baud Rate"
"Data Bit"
"Parity"
"Stop Bit"
Default setting
19200
8
"None"
1
2400/4800/9600/19200/38400
– (FIX)
– (FIX)
– (FIX)
6.3 Data port setup (DATA PORT SETUP)
Available values
"Unit Address (System)"
"Baud Rate"
"Data Bit"
"Parity"
"Stop Bit"
"Retry Timing"
"Alarm Data"
"Channel No."
Default setting
001
9600
8
"None"
1
"Off"
"1s"
-
001 - 099
2400/4800/9600/19200/38400
– (FIX)
"None/Even/Odd"
1/2
"Off/100ms/200ms/400ms/1000ms"
"Off/0s/1s/5s"
-