Panasonic WJ-RT208 - Manual (Page 51)

51
Setting item
Setting item
Setting item
2. Recording Search (SEARCH)
3. Recording & Event Setup (REC & EVENT)
3.1 Timer Recording (TIMER REC)
Note: The parameters for this unit can be defined for each channel.
3.2 Terminal Recording (TERMINAL REC)
Note: The parameters for this unit can be defined for each channel.
The underlined parameters will not be copied when the channel copy is performed.
"Channel No."
"Start"
"End"
"Event Only"
Default setting
0
–
–
"No"
Available values
0 - 8
–
–
"Yes/No"
"Terminal Input"
"Alarm Output"
"Alarm Time"
"Rec. Interval"
"PTZ Preset"
Default setting
1
0
030
060
000
Available values
1 - 8
0 - 3
000 - 999
030 - 999
000 - 256
"Rec. Channel" 1 0 - 8
"Rec. Quality" "Normal" "SP Fine/Fine/Good/Normal/Extended"
"(Frame Rate)" "Full" "Full/1/2F/1/4F/1/8F/1/16F"
"(Stream Type)" "CBR" "CBR/VBR"
"Period1" 00:00 00:00 - 24:00
24:00 00:00 - 24:00
"Off" "Off/On"
"Period2" 00:00 00:00 - 24:00
24:00
"On"
00:00 - 24:00
"Off/On"
"Channel"
"(Rec. Quality)"
"(Frame Rate)"
"(Stream Type)"
"SUN - SAT, DAILY"
Default setting
1
"Normal"
"Full"
"CBR"
00:00
24:00
"Off"
00:00
24:00
"Off"
Available values
1 - 8
"SP Fine/Fine/Good/Normal/Extended"
"Full/1/2F/1/4F/1/8F/1/16F"
"CBR/VBR"
00:00 - 24:00
00:00 - 24:00
"Off/On"
00:00 - 24:00
00:00 - 24:00
"Off/On"