Panasonic WJ-RT208 - Manual (Page 59)

59
Specifications
■ Basic Specifications
General
Power supply 120 V AC, 60 Hz
Power consumption (approx.) 120 W
Ambient operating temperature +5 °C - +45 °C (41 °F - 113 °F)
Ambient operating humidity 5 - 90 % (without condensation)
Dimensions 430 mm (W) x 88 mm (H) x 470 mm (D)
[16.9" (W) x 3.5" (H) x 18.5" (D)]
Weight (approx.) WJ-RT208K: 9.0 k g (19.9 lb) (No hard disk model)
WJ-RT208: 10.0 k g (22.0 lb) (2 hard disks model)
Input/Output
Video Video input 1.0 V[P-P]/75 Ω NTSC composite video signal (BNC) x 8
Video output 1.0 V[P-P]/75 Ω NTSC composite video signal (BNC) x 1
RGB output (15 pin D-sub) x 1
Audio Audio input –10 dB 22 kΩ (BNC) x 8
Audio output –10 dB 22 kΩ (BNC) x 1
Alarm Alarm input Voltage value alarm input (25-pin, D-sub) x 8
Alarm output Switch volume output (contact output of normally ON and normally
OFF) (25-pin, D-sub)
Ethernet port 10BASE-T/100BASE-Tx (RJ-45) x 1
Remote interface RS485 x 1 (25 pin D-sub)
Data interface RS485 x 1 (RJ-11)
Data backup interface High speed serial interface (front panel x 1, rear panel x 1, 0.8 Mbps
to 1.3 Mbps of transfer rate depending on recorder operating state)
HDD interface 4 IDE interfaces are incorporated. (capable of installing eight hard
disks)
Function Video compression mode MPEG4 ["CBR" (fixed bit stream)/"VBR" (variable bit stream)]
Audio compression mode ADPCM
Picture quality (compressed level) Class 5 (independent setting enabled for each line)
Image resolution Live aspect 704 x 480
Recording picture playback 352 x 240 (SIF)
Image display 1-/4-/6-/9-split screen display
Image Recording Rate Live recording of each line (1-30 frames/sec. for each line,
adjustable)
Simultaneous operation Field multiscreen monitoring, recording, playback, network monitor-
ing
Recording Mode Manual/Timer/Terminal/VMD/Power ON REC mode
Video Motion Detection 140 items of motion detector area/motion detector sensitivity Class
99 can be independently set up for each line. (Adjustments are pos-
sible.)