Planet Technology WGS3-2840 - Manual (Page 15)

- 15 -
3.3 Assigning an IP Address to the Layer 3 Managed Switch
To manage the Layer 3 Managed Switch remotely through the console port or with an SNMP Management Station, you
must assign an IP address to the Layer 3 Managed Switch.
The default IP address of the Layer 3 Managed Switch is “192.168.1.254”. If you want to change the IP address, for
example, change the IP address to “192.168.1.186” please input the following command:
WGS3-2840# configuration terminal
(config)# interface vlan 1
(confif-if)#ip address 192.168.1.186/8
Now the IP address has changed to 192.168.1.186. The changed IP address will remain the original after reboot unless
save the configuration. To do this, please input “exit” or “ex” command twice for return to previous configuration level and
input “WGS3-2840# copy running-config startup-config” command to save the current configuration.
You can access the Web interface of Layer 3 Managed Switch through the new IP address.