Planet Technology WGS3-2840 - Manual (Page 40)

- 40 -
4.5.1 Static Route
This section provides Static Route function from Layer 3 Managed Switch . Static route provide manually intensive to keep
up for very quick and effective way to route data from one subnet to different subnet. The static route is a hard coded path
that specifies how the router will get to a certain subnet by using a certain path.
The Static Route screen in Figure 4-36
appears and Table 4-8 descriptions the Static Route Configuration Web page objects.
Figure 4-36 Static Route Configuration Web Page screen
Table 4-8 Descriptions of Static Route Web Page screen Objects
Object Description
Target Network Address/Host Allow input the IP address of Target Network or Host.
Subnet Mask Allow input the subnet mask value.
Next Hop Allow input the value of Next Hop, indicates the IP address of the next hop to which
packets for the entry should be forwarded
.
Metric (1-255) Allow input the value of Metric and the available range is 1-255.
ADD Click this button to add specific port to link aggregation groups.
DELETE Click this button to remove specific port from link aggregation groups.