Planet Technology WGS3-2840 - Manual (Page 37)

- 37 -
RSTP Port Configuration
This function provides Rapid Spanning Tree Bridge Configuration and view the Spanning tree Root Bridge information. The
Rapid Spanning Tree screen in
Figure 4-33 appears. Table 4-6 descriptions the Rapid Spanning Tree Bridge Configu-
ration Web page objects.
Figure 4-33 RSTP Port Configuration Web Page screen
Table 4-6 Descriptions of RSTP Port Configuration Web Page screen Objects
After setup completed, please click “OK” button to take effect.
Object Description
Interface Select one specific Fast Ethernet port or Gigabit Ethernet port for further management.
Edge Port The port directly connected to end stations cannot create bridging loop in the network. To con-
figure the port as an edge port, set the port to “True” status.
P2P Status Some of the rapid state transactions that are possible within RSTP are dependent upon whether
the port concerned can only be connected to exactly one other bridge (i.e. it is served by a
point-to-point LAN segment), or can be connected to two or more bridges (i.e. it is served by a
shared medium LAN segment). This function allows the P2P status of the link to be manipulated
administratively. True is P2P enabling. False is P2P disabling.
Path Cost The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a
number 1 through 200000000.
Port Priority Decide which port should be blocked by priority in LAN. Enter a number 0 through 240. The value
of priority must be the multiple of 16.
Port Mcheck Set
Fa 0/ , Gi 0/, Po Select the Fast Ethernet port or Gigabit Ethernet port for further management.
OK Clink this button for take effect.