Planet Technology WGS3-2840 - Manual (Page 32)

- 32 -
4.3.1 Port Configuration
This section provides port configuration function from Layer 3 Managed Switch. The port configuration screen in Figure
4-28 appears. Table 4-1 & 4-2 descriptions the port configuration Web page objects.
Figure 4-28 Port Configuration Web Page screen
Table 4-1 Descriptions of the Port Configuration Web Page screen Objects
Table 4-2 Descriptions of the View Port Status Web Page screen Objects
Object Description
Interface Select the Fast Ethernet port or Gigabit Ethernet port for further management.
Management Status Allow disable or enable one specific Fast Ethernet port or Gigabit Ethernet port.
Speed / Duplex Allow set one specific Fast Ethernet port or Gigabit Ethernet port speed duplex mode,
the available options shown as below:
Fast Ethernet: Auto, 10H, 10F, 100H, 100F.
Gigabit Ethernet: Auto, 10H, 10F, 100H, 100F, 1000F.
Flow control Allow disable (OFF) or enable (ON) flow control in full-duplex mode.
OK Clink this button for take effect.
Object Description
Interface Display all the ports of Layer 3 Managed Switch.
Management Status Display current management status from each port of Layer 3 Managed Switch.
Link Status Display current link status from each port of Layer 3 Managed Switch.
Speed (Config / Actual) Display the current speed mode and configuration speed mode from each port.
Duplex(Config / Actual) Display the current duplex mode and configuration duplex mode from each port.
Flow control (Config / Ac-
tual) Display the current flow control mode and configuration flow control mode from each
port.
Refresh To refresh the port status table.