Pelco DX2000 - Manual (Page 48)

48 Pelco Manual C690M-E (11/04)
DATA EXCEPTION RECORDING
Figure 17. Record On Data Exceptions Screen
Use this screen to set the video values for recording triggered by data exceptions.
NOTE: The data exceptions also must be defined. Refer to the Data Exceptions section for
instructions.
Note also that in order to maximize hard drive storage space, the DX2000 uses images from
scheduled recording to display images for a transaction. To do this, you need to set scheduled
recording appropriately (for example, at the right image rate, quality, etc.) and for all hours the
cash register or ATM is operational.
Or, if scheduled recording is not desired, you can enable a blank exception (refer to the Data
Exceptions
section) and program it for exception recording. This will record images automati-
cally during any transaction.
If scheduled recording is used for regular transactions, exception recording can be at an
increased speed and/or quality. If exception recording is used, all transactions are recorded at
the same speed and quality.
Do the following to set the video values for data exception recording:
1. Click the Configuration button. Click Record On Data Exceptions. The Record On Data
Exceptions screen appears.
2. Under the Enable heading, checkmark the boxes for the devices from which you want to
record data exceptions.