Pelco DX2000 User Manual
Page 57
Pelco Manual C690M-E (11/04)
57
Use this screen to associate a camera and data format with each data device. When you view
data, video from the associated camera is displayed. For each Device Name defined in the
Data Port Configuration screen, there will be a choice box for the associated camera and for
the associated data format.
Do the following:
1.
Click the Configuration button. Click Data Interface. The Data Interface screen appears
with the Data Port Configuration tab displayed.
2.
Click the Associated Data Format & Camera tab. The Associated Data Format and
Camera screen appears.
3.
Select a data format from the Associated Data Format pull-down menu to associate with
each data device. You can configure up to four formats for your data. (Refer to the
Data
Format and Exceptions section for information on setting up formats.)
4.
Select a camera name from the Associated Camera pull-down menu to associate with
each data device.
5.
Click Save to save values entered on this and previous screens or Cancel to abandon
changes.