Pelco DX2000 - Manual (Page 51)

Pelco Manual C690M-E (11/04) 51
DATA INTERFACE
COMMUNICATION TYPE
Figure 18. Communication Type Setup Screen
Use this screen to define custom communication types. Since there may be more than one
type of POS device or ATM connected to the DX2000, a communication type defines all
parameters the DX2000 needs to communicate with a particular device type. Once defined,
the communication type can be used in the Data Port Configuration screen.
The DX2000 comes with three predefined communication types that cannot be deleted or
edited. However, you can add new communication types (up to 16 total, including the three
predefined).