POLAR S410 - Manual (Page 62)

E 60
Downloading Training Data to a Computer with
Polar Precision Performance Software
Polar S410 offers an easy way to
analyse training data by
computer afterwards. It starts
recording at a sampling rate of 15
seconds up to 120 samples. When
the memory is full, it is compressed
and a longer averaging period is
used (30 s, 1 min, 2 min, 4 min or
8 min) depending on the recording time. Maximum recording time is 16
hours. The table shows the exercise times for each sampling rate.
To be able to transfer the recorded training information via SonicLink™
and to analyse it with Polar Precision Performance software version 4 or
later, you need a personal computer with a sound card and microphone.
To make sure that the training information transfer will be successful,
check that there are no interfering sounds near the computer.
You can transfer only your complete files to a computer
1. Start the software.
2. Activate the download function of the software and follow the
directions on screen.
3. If the receiver is in the Time of Day display scroll up or down until
CONNECT is displayed. Make sure that start is displayed.
Sampling rate Exercising time
15 s - 30 min
30 s 30 min - 1 h
1 min 1 h - 2 h
2 min 2 h - 4 h
4 min 4 h - 8 h
8 min 8 h – 16 h
PPP S410S210 man USAGBR A.pm6 12.3.2003, 11:20 60