POLAR S410 - Manual (Page 64)

E 62
1. Start the software.
2. Activate the transfer function of the software and follow the directions
on screen.
3. If the receiver is in the Time of Day display scroll up or down until
CONNECT is displayed.
4. Place the receiver less than 4"/ 10 cm from the loudspeaker. Do not
move the receiver during the data transfer.
5. The receiver automatically starts to transfer the information.
UpLink and COM appear. You will hear a chirping sound while information
is transferred to the receiver. All settings are transferred completely to the
receiver when 100 % is displayed. Press and hold the stop button to return
to the Time of Day display after data transfer.
If the data transfer was unsuccessful bring the receiver closer to the
loudspeakers or turn the volume level of the loudspeakers up.
You may interrupt the data transfer from the computer by pressing the
stop button during data transfer. CONNECT is displayed.
PPP S410S210 man USAGBR A.pm6 12.3.2003, 08:30 62