POLAR S410 - Manual (Page 63)

E 61
4. Bring and hold the back cover of the receiver next to the computer’s
microphone. Keep the back cover of the wrist receiver within 2" / 5 cm
of the microphone until the SonicLink sound has ceased.
5. Press the OK button to start the data transfer. SonicLink and COM
appear on the display.
You will hear a chirping sound (SonicLink) while the training
information is transferred to the computer. You can monitor
the transfer percentage from the receiver’s display. Press and hold the stop
button to return to the Time of Day display after data transfer.
You can interrupt the data transfer to the computer by pressing the stop
button during data transfer. CONNECT is displayed.
Transferring Settings from Computer with Polar Precision
Performance Software
Polar S410 offers you the option of transferring your settings with Polar
Precision Performance software version 4 or later to the wrist receiver. You
are also able to set a user ID number for easier recognition in multi-user
situations.
To be able to transfer the settings from Polar Precision Performance
software via Polar Uplink, you need a personal computer with a sound
card (compatible with Sound Blaster) and dynamic loudspeakers or
headphones.
PPP S410S210 man USAGBR A.pm6 12.3.2003, 08:30 61