Pioneer S-DV77ST - Manual (Page 17)

17
En/ChH
3 Setting Up
English
4 Use the
5 and ∞ buttons to set the hour,
then press ENTER.
• The default clock display format is 12-hour.
5 Use the
5 and ∞ buttons to set the
minute, then press ENTER.
The display blinks for 2 seconds to indicate that the
time has been set.
Press SYSTEM DISP anytime to see the clock when the
system is on or in standby.
Changing the clock display format
You can choose to display the clock and timer settings
in 12-hour (default setting) or 24-hour format.
1 If the system is on, press STANDBY/ON
to put it into standby.
2 Press SYSTEM MENU and select HOUR
FORMAT.
• Use the
2 and 3 buttons to change the currently
displayed option. Press ENTER to select.
3 Select 12-HOUR or 24-HOUR format.
• Use the
5 and ∞ buttons to change the currently
displayed option. Press ENTER to select.
The system returns to standby after pressing ENTER .
4
5 ∞
ENTER
÷
5
5 ∞
ENTER
SYSTEM DISP
1 STANDBY/
ON
2 SYSTEM MENU HOUR FORMAT
÷ 2 3
ENTER
3 12-HOUR 24-HOUR
÷ 5 ∞
ENTER
ENTER