Pioneer S-DV77ST - Manual (Page 18)

18
En/ChH
Setting Up 3
Setting up for surround
sound
You can use this system right out of the
box for surround sound with just the
default settings. However, for really
great surround sound, we recommend
that you spend a few minutes making
some settings that match this system to
your listening room. These include
setting the distances from your
listening position to your speakers, and
balancing the speaker volumes. Unless
you change the layout of your speakers
or main listening position, you only
need to make these settings once.
Setting the speaker
distances
1 Press SYSTEM SETUP.
• To access this function, hold down
SHIFT , then press SYSTEM SETUP .
2 Press
2 or 3 until you see
FRONT in the display.
FRONT SP 3.Om
3 Use the
5 and ∞ buttons to
set the distance from your
main listening position to the
front left/right speakers.
Ideally, your listening position should
be equidistant from the two front
speakers.
The default setting is 3m. You can
adjust the range from 0.3m to 9.0m in
steps of 0.3m.
TEST
TONE
SYSTEM
VOL
+
–
ENTER
DVD
5
∞
3 2
SURROUND
SHIFT
SETUP
SYSTEM
STANDBY
/ON
SYSTEM
MENU
1 SYSTEM SETUP
÷
SHIFT
SYSTEM
SETUP
2
2 3
FRONT
3
5 ∞
FRONT SP 3.Om