Pioneer S-DV77ST - Manual (Page 44)

44
En/ChH
Playing Discs 6
4
>10 >
10 , 2 , 4
÷
5
∞
Program Memory” On”
÷
6 ENTER
6
PROGRAM
1 PROGRAM ( SHIFT 8 )
2
>10 >10 ,
2 , 4
÷
4 Enter the title/chapter numbers for your
program list.
For titles/chapters 1–10, use the corresponding number
buttons. For 11 and over, use the >10 button (>10, 2,
4 for 24, etc.)
• A program list can contain up to 24 steps.
5 If you want to save the program list, move
the cursor down (
∞) to ‘Program
Memory’ and set it to ‘On’.
If you do this, the program list is automatically recalled
when you next load the disc.
• You can save program lists for up to 24 discs.
6 Press ENTER or
6 to start playback
immediately, or PROGRAM to exit if you
want to start playback later.
During program play, you may occasionally see the start
of a chapter that was not programmed when the chapter
number changes. This is not a malfunction.
For Video CDs that feature PBC, make sure that the disc
is stopped before you start.
1 Press PROGRAM ( SHIFT and 8 ).
2 Enter the track numbers for your program
list.
For tracks 1–10, use the corresponding number buttons.
For 11 and over, use the >10 button (>10, 2, 4 for 24,
etc.)
• A program list can contain up to 24 steps.