Pioneer S-DV77ST - Manual (Page 46)

46
En/ChH
Playing Discs 6
1 REPEAT ( SHIFT 4 )
÷ Repeat Chapter
÷ Repeat Title
÷ Repeat Off
÷ Repeat Track
÷ Repeat Disc
÷ Repeat off
2 CLR
REPEAT
1 A-B
( SHIFT 5 )
÷
2 CLR
÷
6
A-B
Using repeat play
You can set the player to repeat individual tracks on CDs
or Video-CDs, chapters or titles on DVD discs, or the
whole disc. It's also possible to loop a section of a disc.
You can use the repeat together with the programming
mode to repeat the tracks/chapters in the program list
(see page 43 for how to make a program list).
1 Press REPEAT ( SHIFT and 4 ) during
playback to select a repeat mode.
Each press switches the repeat mode:
• Repeat Chapter
• Repeat Title
• Repeat Off
• Repeat Track
• Repeat Disc
• Repeat off
2 To resume normal playback, press CLR.
You can use repeat play with program play . During
program play, press
REPEAT .
Looping a section of a disc
1 Press A-B ( SHIFT and 5 ) once at the
start of the section you want to repeat,
then again at the end.
Playback immediately jumps back to the start point and
plays the loop round and round.
• On a DVD disc, the start and end points of the loop
must be in the same title.
2 To resume normal playback, press CLR.
• You can also repeat a section of a disc just once by
pressing
6 to mark the end point (instead of
A - B ).