Pioneer S-DV77ST - Manual (Page 21)

21
En/ChH
3 Setting Up
English
4
5 ∞
5 TEST TONE
AUTO
NTSC
1
2 SYSTEM MENU
3
2 3
VIDEO
SELECT
4 ENTER
5
5 ∞
AUTO , PAL NTSC
6 ENTER
Lch OdB
Lch + 3dB
4 Use the
5 and ∞ buttons to adjust the
level of a speaker as the test tone plays.
Lch OdB
Lch + 3dB
For best results, sit in your main listening position when
doing this. You can adjust each speaker in the range of
+/-10dB.
5 When you're done, press TEST TONE to
turn off the test tone.
Setting the TV System
The default setting of this player is AUTO , and unless
you notice that the picture is distorted when playing
some discs, you should leave it set to
AUTO .
If you experience picture distortion with some discs, set
the TV system to match your country or region.
When set to NTSC , PAL encoded DVD discs are output
as is.
1 Make sure that the system is in standby.
2 Press SYSTEM MENU.
3 Press
2 or 3 repeatedly until you see
VIDEO SELECT appear in the display.
4 Press ENTER.
5 Use
5 or ∞ to select the video system.
Switch between AUTO , PAL and NTSC .
6 Press ENTER.