Using front stage surround advance, Using stream direct, Using the sound retriever – Pioneer VSX-519V-K User Manual

Page 30: Listening to your system 05

Advertising
background image

Listening to your system

05

30

En

Using Front Stage Surround
Advance

The Front Stage Surround Advance function
allows you to create natural surround sound
effects using just the front speakers and the
subwoofer.

While listening to a source, press STEREO/

A.L.C. to select Front Stage Surround Advance
modes.

STEREO – See Listening in stereo on

page 29 for more on this.

A.L.C. – See Listening in stereo on page 29

for more on this.

F.S.S.ADVANCE – Use to provide a rich

surround sound effect directed to the
center of where the front left and right
speakers sound projection area converges.

Using Stream Direct

Use the Stream Direct modes when you want
to hear the truest possible reproduction of a
source. All unnecessary signal processing is
bypassed.

While listening to a source, press AUTO/

DIRECT to select Stream Direct mode.

AUTO SURROUND – See Auto playback on

page 28.

DIRECT – Sources are heard according to

the settings made in the Surround Setup
(speaker setting, channel level, speaker
distance), as well as with dual mono
settings.

1

You will hear sources according

to the number of channels in the signal.

PURE DIRECT – Analog and PCM sources

are heard without any digital processing.

2

Using the Sound Retriever

When audio data is removed during the
compression process, sound quality often
suffers from an uneven sound image. The
Sound Retriever feature employs new DSP
technology that helps bring CD quality sound
back to compressed 2-channel audio by
restoring sound pressure and smoothing
jagged artifacts left over after compression.

3

Press S.RETRIEVER to switch the sound

retriever on or off.

STANDARD ADV SURR

STEREO/

A.L.C.

AUTO/

DIRECT

AUDIO

TUNER EDIT

MASTER

STEREO/

A.L.C.

Front left

speaker

Front right

speaker

F.S.S.ADVANCE

position.

STANDARD ADV SURR

STEREO/

A.L.C.

AUTO/

DIRECT

AUDIO

TUNER EDIT

MASTER

AUTO/

DIRECT

Note

1 In the DIRECT mode, Phase Control, Sound Delay, LFE Attenuate and Auto Delay functions are available.

2 There are cases where a brief noise is heard before playback of sources other than PCM. Please select AUTO SURROUND or

DIRECT

if this is a problem.

3 The Sound Retriever is only applicable to 2-channel sources.

MIDNIGHT PHASE S.RETRIEVER

BD MENU

VOL

S.RETRIEVER

VSX_519V_KU.book Page 30 Wednesday, December 24, 2008 4:38 PM

Advertising