Panasonic WJ-ND200 User Manual
Page 12
12
Important:
• Only the mounted hard disk drives can be formatted when operating in the mirroring mode. It is impossible to for-
mat an unmounted hard disk drive or a hard disk drive that is in the process of mounting.
• When the USE button is not blinking green (neither off nor blinking orange), the corresponding hard disk drive is
already formatted. When the hard disk drive is formatted, all data on the disk will be erased.
• The hard disk drive for which the write protection is on cannot be formatted.
• When the following operation is being performed, it is impossible to switch the operational mode from the single
mode to the mirroring mode.
• SD memory data obtainment
• Auto camera registration ("Quick" – "Camera Auto Registration")
• Camera search ("Camera" – "Camera Search")
• When formatting the hard disk drives in the mirroring mode, connection to the FTP server and sending mails are
unavailable.
• When using in the mirroring mode, the actual available size of the hard disk drive will be smaller than when using
in the single mode.
Switch the operational mode from the mirroring mode to the
single mode
To change the operational mode from the mirroring mode to the single mode, do the following.
z
Open the front cover and confirm that both
the USE buttons are off (indicating that no
hard disk drive is mounted).
Note:
Refer to page 13 for how to remove the hard disk
drive.
x
Hold down the both FORMAT buttons for 5
seconds or more.
Switching the operational mode from the mirror-
ing mode to the single mode will start. (The
buzzer will start sounding and the FORMAT but-
tons will start blinking green.)
When operation of the unit in the single mode
starts, the FORMAT buttons and MIRROR indi-
cator will go off.
HDD bay slot
<Inside the front cover>
USE button (with the indicator)
HDD1
HDD2
FORMAT
USE
USE
FORMAT
MIRROR indicator
<Inside the front cover>
USE button
(with the indicator)
FORMAT button (with the indicator)
LINK
/ACT
HDD2
HDD1
ALARM
SUSPEND
ALARM
BUZZER
STOP
ERROR
MIRROR
TIMER
REC
OPERATE
HDD1
HDD2
FORMAT
USE
USE
FORMAT