Panasonic WJ-ND200 - Manual (Page 35)

35
Cancel the Alarm Action
The alarm action will be performed when an event is detected.
To cancel the alarm action manually, do the following.
Screenshot 1
[ALM] will be displayed in the status display area when
an alarm occurs.
Step 1
Click the [ALM] button.
→ The alarm action will be canceled.
Note:
When "CONTINUE" is selected for "Recording
Duration" of "Emergency REC", the emergency
recording currently being carried out can be stopped
by clicking the [ALM] button. When "MANUAL" is
selected for "Recording Duration", the emergency
recording will not stop by clicking the [ALM] button.
Suspend the Alarm Action
Configure the settings to not to perform the alarm action even when an event occurs. It is useful to suspend the
alarm action at an event occurrence such when maintaining the unit for a certain period.
Even though the alarm action is suspended, recording of images, event log recording, the preset action and display
of the [ALM] button will be performed.
Screenshot 1
Display the operating window.
Step 1
Click the [ALARM SUSPEND] button.
→ The alarm action will be suspended.
The "ALARM SUSPEND" indicator on the front panel
of the unit will light.
Step 2
To release the alarm suspension, click the [ALARM
SUSPEND] button again.
→ The "ALARM SUSPEND" indicator on the front panel
of the unit will go off.