Panasonic WJ-ND200 - Manual (Page 23)

23
Start playback from a designated time and date
Start playback by designating the desired time and date of a recorded image to be played. Playback is also available
during recording.
Screenshot 1
Click the [GO TO DATE] button in the playback point
operation area after selecting the desired camera chan-
nel to display the "GO TO DATE" window.
Note:
When playing MPEG-4 image by designating time
and date, playback may start from a point several
seconds after the designated time and date or from
the first frame of the next record.
Step 1
Click the [i] button and enter the desired time and
date of a recorded image to be played.
Step 2
Click the [PLAY] button.
→ Playback of recorded images corresponded to the
entered time and date will start. will be dis-
played in the status display area.
When there is no image for the entered time and
date, the following action will be taken.
When there are images recorded after the entered
time and date, the nearest recorded image after the
entered time and date will be played.
When there are images recorded after the entered
time and date, the nearest recorded image after the
entered time and date will be played.
Screenshot 2
The recorded images will be played.
Step 3
Click the [STOP] button on the [HDD] tab to stop play-
back.
→ displayed in the status display area will go off
and a live image will be displayed.