Pioneer VSX-2014i - Manual (Page 24)

Controls and displays 04
24
En
1 MULTI JOG dial
Use the MULTI JOG dial to select various settings and
menu options.
2 STANDBY/ON
Switches the receiver between on and standby.
3 LISTENING MODE SELECT
Use with the MULTI JOG dial to select the various
listening modes (page 30).
4 ENTER
5 Character display
See Display on page 25.
6 Remote sensor
Receives the signals from the remote control.
7 i.LINK indicator (VSX-2014i model only)
Lights when an i.LINK-equipped audio component is
selected (page 63).
8 MCACC indicator
Lights when Acoustic Calibration EQ (page 33) is on
(Acoustic Calibration EQ is automatically set to
ALL CH
ADJUST after the Auto MCACC Setup (page 11) or EQ
Auto Setting (page 41) is complete).
9 Input select buttons
Press to select an input source.
10 MASTER VOLUME dial
11 Front panel controls
To access the front panel controls, push gently on the
lower third portion of the panel with your finger.
12 TUNER CONTROL
TUNER EDIT
Use with the MULTI JOG dial to memorize and name
stations for recall (page 48).
TUNING/STATION
Use with the MULTI JOG dial to select station presets
and radio frequencies. (page 47).
BAND
Switches between AM and FM radio bands (page 47).
MPX (VSX-1014 model only)
Press to receive a radio broadcast in mono (page 47).
13 PTY SEARCH
Use this button to search for RDS program types
(page 50).
EON
Use to search for programs that are broadcasting
traffic or news information (page 50).
14 TONE
When the STEREO mode is selected, press this button to
access the bass and treble controls, which you can then
adjust with the
MULTI JOG dial.
15 ACOUSTIC EQ
Press to select an Acoustic Calibration EQ setting
(page 33).
16 i.LINK SELECT (VSX-2014i model only)
Use with the MULTI JOG dial to select unassigned i.LINK
components (page 63).
17 MULTI CH IN
Press to select the component connected to the MULTI
CH IN terminals (for example, a DVD-Audio player). See
Selecting the multichannel analog inputs on page 37.
18 SIGNAL SELECT
Use to select an input signal (page 33).
19 EXTENDED MODE
Selects the surround back channel mode (page 34) or
virtual surround back mode (page 35).
20 SPEAKERS
Use to change the speaker system (page 59).
21 VIDEO2 INPUT
See Connecting to the front panel video terminal on
page 18.
22 MCACC SETUP MIC jack
Use to connect the supplied microphone.
23 MULTI ROOM controls (VSX-2014i model only)
If you've made multi-room connections (see Multi-room
listening on page 61) use these buttons to control the sub
room from the main room (see Using the sub room
controls on page 62).
24 System Setup menu controls
SYSTEM SETUP
Use with the MULTI JOG dial to access the System
Setup menu (page 11, page 38, page 67).
RETURN
Press to confirm and exit the current menu screen.
25 PHONES jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
26 DIALOG ENHANCEMENT (VSX-1014 model only)
Use to make dialog stand out when watching TV or a
movie (page 36).
27 MIDNIGHT/LOUDNESS (VSX-1014 model only)
Use Midnight when listening to movie soundtracks at low
volume. Use Loudness to boost the bass and treble at low
volume (page 36).
MA ST ER V OL UM E
DV D/LD TV /SA T DV R/V CR VID EO 1 CD CD -R/ TA PE /M D
ST AN DB Y/ON
MULT I JOG
TU NE R VID EO 2
VS X-52 TX
AU DI O/VI DE O M UL TI-CHAN NE L R EC EI VE R
LIS TE NIN G M OD E SE LE CT
ENT ER
VSX_2014TX.book.fm Page 24 Wednesday, June 2, 2004 5:21 PM