12 volt trigger setup sacd gain setup, Other settings 11, 12 volt trigger setup – Pioneer VSX-2014i User Manual
Page 72: Sacd gain setup
Other Settings
11
72
En
3
Select the type of IR receiver you’re using.
•
Setting 1
– Use this setting for most IR receivers.
•
Setting 2
– Use this setting if the IR receiver you’re
using doesn’t seem to work after selecting
Setting 1
.
4
When you're finished, press RETURN.
You will return to the Other Setup menu.
Note
• Some IR receivers may not work with this receiver.
Check with your audio dealer for more information.
12 Volt Trigger Setup
VSX-2014i model only
• Default setting:
OFF
(all components)
After connecting a component the 12 volt trigger (see
Switching components on and off using the 12 volt trigger
on page 65), it switches on automatically when you select
an input function set to switch the trigger on. Specify
which input functions switch on the trigger below.
1
Select ‘12V Trigger Setup’ from the Other Setup
menu.
2
Select an input function and choose the setting
that you want.
This should be the input function, that when selected,
switches on the 12 volt trigger.
•
OFF
– 12 volt trigger is not activated for the selected
component.
•
ON
– 12 volt trigger is activated for the selected
component.
3
Repeat for as many input functions as you would
like to set.
4
When you're finished, press RETURN.
You will return to the Other Setup menu.
SACD Gain Setup
VSX-2014i model only
• Default setting:
0dB
You can get more detail from SACDs by maximizing the
dynamic range (during digital processing) using the
SACD gain feature.
1
Select ‘SACD GAIN Setup’ from the Other Setup
menu.
2
Switch the SACD gain between 0dB and 6dB.
For most SACD sources, selecting
6dB
will result in high
sound quality and greater detail. The level will be
adjusted automatically for playback at the same volume.
3
When you're finished, press RETURN.
You will return to the Other Setup menu.
Note
• You shouldn’t have any problems using this feature
with most SACD discs, but if the sound distorts, it is
best to switch the gain setting back to
0dB
.
6e. Multi Room Setup
Volume Level
[ VARIABLE ]
IR Setting
[
Setting 1
]
6. Other Setup
[
a . DRC Setup
]
[ b . Dual Mono Setup
]
[ c . LFE ATT Setup
]
[ d . SR+ Setup
]
[ e . Multi Room Setup
]
[
f . 12V Trigger Setup
]
[ g . SACD GAIN Setup
]
6f. 12V Trigger Setup
DVD/LD [
OFF
]
TV/SAT
[ OFF ]
DVR
[ OFF ]
VIDEO1
[ OFF ]
VIDEO2
[ OFF ]
TUNER
[ OFF ]
CD-R
[ OFF ]
CD
[ OFF ]
6f. 12V Trigger Setup
DVD/LD [
ON
]
TV/SAT
[ OFF ]
DVR
[ OFF ]
VIDEO1
[ OFF ]
VIDEO2
[ OFF ]
TUNER
[ OFF ]
CD-R
[ OFF ]
CD
[ OFF ]
6. Other Setup
[
a . DRC Setup
]
[ b . Dual Mono Setup
]
[ c . LFE ATT Setup
]
[ d . SR+ Setup
]
[ e . Multi Room Setup
]
[ f . 12V Trigger Setup
]
[
g . SACD GAIN Setup
]
6g. SACD GAIN Setup
SACD GAIN
[
+
6dB
]
VSX_2014TX.book.fm Page 72 Wednesday, June 2, 2004 5:21 PM