Pioneer VSX-2014i - Manual (Page 69)

Other Settings 11
69
En
The Other Setup menu
The Other Setup menu is where you can make
customized settings to reflect how you are using the
receiver.
1 Switch on the receiver and your TV.
Use the RECEIVER button to switch on.
2 Press RECEIVER on the remote control, then press
the SYSTEM SETUP button.
An on-screen display (OSD) appears on your TV. Use the
/ / / buttons and ENTER on the remote control to
navigate through the screens and select menu items.
Press
RETURN to confirm and exit the current menu.
3 Select ‘Other Setup’ then press ENTER.
4 Select the setting you want to adjust.
If you are doing this for the first time, you may want to
adjust these settings in order:
• DRC Setup – Specify the amount of dynamic range
adjustment to Dolby Digital soundtracks (see
Dynamic Range Control Setup below).
• Dual Mono Setup – Isolate one channel when
listening to discs with dual mono encoding (see Dual
Mono Setup below).
• LFE ATT Setup – Choose the attenuator level for the
LFE channel ( LFE Attenuator Setup below).
• SR+ Setup – Specify how you want to control your
Pioneer plasma display ( SR+ Setup for Pioneer
plasma displays on page 71).
The following are available with the VSX-2014i model:
• Multi Room Setup – Specify your volume setting
and IR receiver type for a multi-room setup (see Multi
Room Setup on page 71).
• 12V Trigger Setup – Specify which components are
switched on or off using the 12 volt trigger (see 12 Volt
Trigger Setup on page 72).
• SACD GAIN Setup – Listen to high sound quality and
greater detail with SACDs (see SACD Gain Setup on
page 72).
5 Make the adjustments necessary for each
setting, pressing RETURN to confirm after each
screen.
+10 INPUT ATT FL DIMMER SR
DISC
RECEIVER
MULTI CONTROL
SOURCE INPUT
SELECT
ENTER
TV CONTROL
VOL
DVD/LD TV/SAT DVR/VCR TV CONT
CD
ST ST
INPUT
SELECT TV CH
TUNER
DISPLAY
MPX
AUDIO
CH RETURN
SUBTITLE
REC MUTE
TV VOL
CD-R/TAPE TUNER RECEIVER
ENTER
REC STOP
HDD DVD
D.ACCESS
TOP MENU
CLASS
MENU
BAND
RETURN GUIDE
T.EDIT
SYSTEM
SETUP
A
B C D E
TUNE
TUNE
System Setup
[ 1. Surr Back System ]
[ 2. AUTO MCACC ]
[ 3. MANUAL MCACC ]
[ 4. Manual SP Setup ]
[ 5. Input Assign ]
[ 6. Other Setup ]
Enter : Select
Return : Exit
6. Other Setup
[ a . DRC Setup ]
[ b . Dual Mono Setup ]
[ c . LFE ATT Setup ]
[ d . SR+ Setup ]
[ e . Multi Room Setup ]
[ f . 12V Trigger Setup ]
[ g . SACD GAIN Setup ]
VSX_2014TX.book.fm Page 69 Wednesday, June 2, 2004 5:21 PM