Pioneer VSX-21 - Manual (Page 41)

41
<ARB7181>
SET UP
OPERA
TION
Adjusting bass and treble (tone control)
Use BASS (+/–) or TREBLE (+/–) to adjust the low and high frequencies.
Press BASS (+/–) to adjust the low frequencies.
Press TREBLE (+/–) to adjust the high frequencies.
dB
SP SIGNAL
SELECT
ANALOG
A
dB
SP SIGNAL
SELECT
ANALOG
A
TREBLE +/–
BASS +/–
memo
• The tone control can be adjusted in a range of ±6.
• Pressing + and – simultaneously restores the setting to 0.
• In cases described below, the tone control cannot be adjusted.
1 Dolby/DTS mode is ON.
2 DSP mode is ON.
3 DVD 5.1ch input is selected.
Adjusting the brightness of the display
Use FL DIMMER to adjust the brightness of the fluorescent display.
Press FL DIMMER.
Four levels of brightness ranging from very dim to very bright can be
selected. Each press changes the brightness of the display. When rotating
through the options, the default brightness can also be selected.
FL DIMMER
In standby, pressing STANDBY/ON while holding down the /DTS button
returns the display to the default brightness.
DVD/LD
VCR 1
TV/SAT CD
TUNER
VCR 2 MD/TAPE
TV CONTROL
RECEIVER
DSP MODE
CH.SELECT ATT SIG.SELECT
MIDNIGHT
TEST TONE
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
2 3
5
0
6
9 +10
TV/VCR CLASS
7 8
4 1
CHANNEL
MULTI CONTROL
ENTER
VOL VOL
FQ
FQ
+
–
TV FUNC
RECEIVER TV
MUTING
CN.LEVEL EFFECT
FL DIMMER FUNCTION DIRECT
MODE CHECK
COMMANDER
SET UP
Î
MEMU
Other Operations
memo