Pioneer VSX-21 - Manual (Page 51)

51
<ARB7181>
SET UP
OPERA
TION
Background Control of Other Components
The following steps show you how to control one component while listening to another. This may be useful if you want
to rewind a tape while listening to CD, etc.
1
Select a component, then start playback.
For example:
Press FUNCTION to select the CD player, then press the CD button,and
start playing a CD. (You should hear the sound of the CD playing back.)
2
Press MODE CHECK to display the current operation
mode.
The corresponding MULTI CONTROL button lights up.
For example:
The CD button should light up to indicate that the remote is set to
operate the CD player.
3
Press MODE CHECK repeatedly to select another
operation mode.
Each time you press MODE CHECK, the next MULTI CONTROL button
should light, enabling you to operate the selected device.
For example:
Press repeatedly to light the MD/TAPE button. The receiver’s function
remains set to CD (and you should still hear the CD player), but the
remote control is now set to operate the tape deck.
4
Perform the desired operation(s).
The remote control remains in the selected operation mode, so you
may perform as many operations as necessary.
For example :
Press
1 to rewind the tape.
5
Press MODE CHECK repeatedly to switch back to the
original operation mode.
You can also switch back to the original operation mode by pressing
the corresponding MULTI CONTROL button.
For example :
Press MODE CHECK repeatedly to light the CD button, or press the CD
button.
Other Operations
DVD/LD
VCR 1
TV/SAT CD
TUNER
VCR 2 MD/TAPE
TV CONTROL
RECEIVER
DSP MODE
CH.SELECT ATT SIG.SELECT
MIDNIGHT
TEST TONE
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
2 3
5
0
6
9 +10
TV/VCR CLASS
7 8
4 1
CHANNEL
MULTI CONTROL
ENTER
VOL VOL
FQ
FQ
+
–
TV FUNC
RECEIVER TV
MUTING
CN.LEVEL EFFECT
FL DIMMER FUNCTION DIRECT
MODE CHECK
COMMANDER
SET UP
Î
MEMU
1
2,3,5