Planet Technology Network Device WAP-4033PE - Manual (Page 30)

3.4.4 WPA RADIUS
WiFi Protected Access (WPA) is an advanced security standard. You can use an external
RADIUS server to authenticate wireless stations and provide the session key to encrypt data
during communication. It uses TKIP or CCMP (AES) to change the encryption key frequently.
This can improve security very much. You can use WPA RADIUS encryption in “AP mode”, “AP
Bridge-WDS mode” and “Universal Repeater mode”.
Parameter Description
Encryption Please select “WPA pre-shared key” in this option.
WPA (TKIP) TKIP can change the encryption key frequently to enhance the wireless
LAN security.
WPA2 (AES) This use CCMP protocol to change encryption key frequently. AES can
provide high-level encryption to enhance the wireless LAN security.
WPA Unicast
Cipher Suite
WPA2 Mixed This will use TKIP or AES based on the other communication peer
automatically.
RADIUS Server IP Address
Enter RADIUS Serer IP address.
RADIUS Server Port
Leave the default port setting or assign a new port number for this
option.
RADIUS Server Password
Please enter the password that is assigned in RADIUS Server.
After configuration complete, please click “Apply” button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press “Continue” for
configure other settings or “Apply” to restart WAP-4033PE with new configuration.
30