Planet Technology Network Device WAP-4033PE User Manual
Page 38
Q. When WAP-4033PE works with WDS mode, can wireless connect to it?
A. Yes, WDS mode is work as a AP and Bridge at the same time. So the wireless client can access to
WDS mode WAP-4033PE without problem. When wireless client connect to the remote site via WDS
mode, the performance will be 50% then access to the connected WDS mode WAP-4033PE. Just like
connect to AP via a repeater.
Q. How much wired client can connect to Station mode WAP-4033PE?
A. We will suggest you connect max. 5 wired clients to a WAP-4033PE. This more is not suit to connect a
large wired network. If you have much more clients has to connected via wireless, please set
WAP-4033PE to Bridge mode. Bridge mode will be suit to connect wired LANs together.
Q. Is WAP-4033PE Bridge mode compatible with other bridge mode device?
A. Yes. WAP-4033PE Bridge mode is compatible with WAP-4033 / WAP-4035 and WRT-414. They are
designed with the same chipset. So their bridge mode is compatible to each other.
Q. When I set WAP-4033PE to Universal Repeater mode, the PCs that connect to WAP-4033PE
LAN port can not access to wireless network. Why?
A. Since Repeater is use to extend the AP’s coverage only, so the PC connect to Repeater LAN port will
be configure repeater only. It can not connect to wireless network.
38