Planet Technology Network Device WAP-4033PE - Manual (Page 31)

3.5 MAC Filtering
For security reason, the MAC Address Filtering that only allows authorized MAC Addresses
associating to the Access Point.
Parameter Description
Enable Wireless Access Control Enable or disable the MAC Address Filtering function.
MAC Address Filtering Table This table records the MAC addresses of wireless stations you
allowed to access your network. The “Comment” field is the
description of the wireless station associated with the “MAC
Address” and is helpful for you to recognize the wireless station.
Add MAC address into the table In the bottom “New” area, fill in the “MAC Address” and
“Comment” of the wireless station to be added and then click
“Add”. Then this wireless station will be added into the “MAC
Address Filtering Table” above.
Remove MAC address from the table If you want to remove some MAC address from the “MAC
Address Filtering Table”, select the MAC addresses you want to
remove in the table and then click “Delete Selected”. If you want
to remove all MAC addresses from the table, just click “Delete
All” button.
Reset Click “Reset” will clear your current selections.
After configuration complete, please click “Apply” button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press “Continue” for
configure other settings or “Apply” to restart WAP-4033PE with new configuration.
31